You have a attractive laminate floor and you might be thinking if you should end the concrete stairs in laminate to give the space a cohesive, designer experience. 1st of all, is it doable? Can you include concrete with laminate? The solution is sure. In actuality, if you’ve at any time included picket stairs, the procedure is similar, besides that the nosing installation is a tiny trickier.
What You can expect to Need
To execute this process you are going to have to have:
- PL200 or more powerful building glue
- Talent observed for chopping laminate
- Chop saw for reducing metallic nosings
- drill with a concrete bit
- electric screwdriver
- plastic plugs
- broom
I advise making use of metallic nosings as these are more robust, and will maintain superior on concrete stairs. (Laminate nosings that come in a kit are also trickier as the tracks have to have to be in exactly the right place, and there is just not a good deal of standardization–just about every manufacturer can make a a little bit diverse size/fashion of laminate nosing).
What to Do
Start off by sweeping the stairs and cleaning up any shavings or dust. You may require a clear surface for the glue to adhere properly to the concrete and laminate. The moment the location is thoroughly clean, start off with the risers initial.
Evaluate, mark and lower each laminate plank to healthy the riser with the groove side struggling with downwards. Glue the riser and the back again of the plank, and safe the plank in location, once more, producing absolutely sure that the groove is at the base of the riser. As soon as all the risers are glued, you are ready to start out on the nosings.
Start out by measuring and cutting the metal nosings to in good shape. Mark on the concrete in which the screws will go, then applying a drill with a concrete bit, drill the holes. Position a plastic plug in each individual gap. Selection the nosings so that you match every single a person to the correct tread when you screwnail them in later.
Measure, mark and reduce each individual laminate plank to suit the tread with the groove facet experiencing inwards to fulfill the bottom of the riser. Arranging the planks so that the groove on the riser meets the groove on the tread would make for a thoroughly clean, experienced edge in the corner. Glue the tread and the back again of the plank and safe the plank in position, making guaranteed that groove faces inward.
Stair nosings are meant to finish the glance by capping the lip of the stair. Regretably, with concrete stairs this can be a very little tricky as the lip on the stairs is generally thicker than the real stair nosing. If this is the, reduce a laminate plank so that it’s broad plenty of to go over the the concrete lip, and glue it to the facial area of the lip on each tread. Then safe the nosing around leading by screwnailing it by way of the laminate tread into the pre-drilled holes in the concrete. (If you’ve got by now coated the lip-encounter with laminate, you can glue the nosing to the laminate for additional adherence, and then screwnail the leading of the nosing into area.)
